|
|
| Applicable
district(3) |
| Kayak / Boat |
| To operate on a boat, you should mount the sonar on the hull before moving as the cable and sonar might be damaged from towing in water. |
| Install sonar in a tube and mount on rear of the boat near center position fixing the sonar around 8 inches(20cm) under the surface.(See figure) (as figure shown) |
| It will then survey both bottom contour and depth. When moving slowly, all information will be shown on screen immediately. |
| Caution: The cable of sonar may break if your speed is too fast. |
|
|
